Útmutató

Which Padlocks Are Actually Hard to Pick? Brands Ranked by Pick Resistance

Master Lock, ABUS, American Lock, Abloy: what separates a padlock that opens in twenty seconds from one that stops a competent picker — and how to read your own.

Updated 1 October 2026 · Gear · 10 min read

Every beginner asks the same question in their second week: which padlocks are actually hard to pick? The answer has very little to do with price, weight or how solid the body looks, and almost everything to do with four things inside the cylinder. Here is what separates a padlock that falls in twenty seconds from one that stops a competent picker — brand by brand, graded against the community belt ranking.

What makes a padlock hard to pick (it is not the price)

A padlock's body protects against bolt cutters. Its cylinder is what resists picking, and the two have nothing to do with each other — which is why a heavy, hardened padlock can open faster than a small brass one. Four features decide pick resistance:

  • Security pins. Spool, serrated and mushroom driver pins give false sets and counter-rotation. One spool pin roughly doubles the difficulty; three change the lock's character entirely. See security pins explained.
  • Manufacturing tolerances. Picking exists because the pin chambers are drilled slightly off line. Tighter tolerances mean a narrower window in which a pin will set, and far less forgiveness on tension.
  • The keyway. A narrow, paracentric keyway with warding that overlaps the centre line forces your pick to work around it. Wide keyways are generous; tight European keyways are not.
  • A different mechanism entirely. A disc detainer has no spring-loaded pins to bind, so none of the above applies and your picks do not fit. This is the real jump in difficulty.

The short version: pin count barely matters. Security pins and tolerances decide whether a padlock takes twenty seconds or an hour, and a disc detainer core puts the lock in a different sport. A €7 brass padlock with one spool pin is harder to pick than a €40 hardened padlock with four standard pins.

How we graded these padlocks

Everything below is our own bench experience on locks we bought, picked and in most cases took apart, cross-checked against what the belt ranking community reports. Belt levels refer to single pin picking, not raking and not bypasses. Two honest caveats: batch variation is real — two padlocks of the same model can differ noticeably — and manufacturers change pinning without changing the model number, so treat these as ranges, not promises.

Master Lock: the brand every picker starts on

Master Lock is the most picked brand in the hobby, for one reason: the laminated padlocks are everywhere and they are forgiving. That is not an insult — it is exactly why they make good first locks.

Master Lock laminated padlocks (No. 3, 140, 150)

Four standard pins, generous tolerances, a wide keyway. These rake open in seconds and single pin pick in under a minute once you can find a binding pin. White belt. If you have a laminated Master Lock in a drawer, that is your second practice lock after a clear one.

Master Lock ProSeries

A genuinely different product from the same company: spool pins, tighter tolerances, better machining. Expect false sets and counter-rotation, and expect to lose a few sessions to them. Orange to green belt. This is where Master Lock stops being a beginner brand.

Master Lock combination padlocks

No keyway, so no picking — a different attack surface entirely (decoding), and not what this page is about.

ABUS: the European brand that takes security pins seriously

ABUS is the padlock you are most likely to meet on a European shed, gate or bike. The range spans a very wide difficulty band, so the model number matters more than the badge.

ABUS brass padlocks (55, 65 series)

Entry-level brass. Standard pins in the smaller sizes, sometimes one spool as the sizes go up, moderate tolerances. White to yellow belt — a good first "real" padlock after a transparent one.

ABUS 83 series

The rekeyable industrial line, and a favourite of the locksport community precisely because you can take the cylinder apart. Mixed spool and serrated pins, tighter keyway. Orange to green belt, and the natural companion to a pin kit once you want to build your own difficulty.

ABUS Granit

The top of the range, and the interesting one: many Granit models move to the ABUS Plus disc-detainer cylinder — rotating discs and a sidebar instead of pins. Your hooks and rakes are useless on it; you need a dedicated disc detainer pick. Blue belt and beyond.

The other padlock brands you will meet

Brand / family Cylinder Pins you will typically meet Belt
No-name brass, Brinks, supermarket padlocks Pin tumbler Standard, loose tolerances White
Master Lock laminated (No. 3, 140, 150) Pin tumbler 4 standard pins, wide keyway White
ABUS 55 / 65 brass Pin tumbler Standard, sometimes one spool White–yellow
Master Lock ProSeries Pin tumbler Spool pins, tighter Orange–green
ABUS 83 series (rekeyable) Pin tumbler Spool + serrated Orange–green
American Lock 1100 / 5200 Pin tumbler Spool pins, tight tolerances Green–blue
Squire Stronghold Pin tumbler Security pins, narrow keyway Green–blue
ABUS Granit (Plus models) Disc detainer No pins at all Blue and beyond
Mul-T-Lock Telescopic pin-in-pin Security pins, two pin stacks per chamber Blue and beyond
Abloy Protec2 Disc detainer + sidebar No pins Past hobby level

American Lock vs Master Lock is a question we get often: same parent company, completely different product. American Lock's 1100 and 5200 series were built for industrial use — hardened body, boron shackle, spool pins and tight tolerances. Treat the brands as unrelated when judging pick resistance.

Hardest padlocks to pick, honestly

For a hobbyist with a hook and a tension wrench, the ranking is less about brands than about mechanisms:

  1. Abloy Protec2 and similar disc-detainer-plus-sidebar systems. Realistically outside hobby reach; a handful of people in the world open these on video.
  2. Mul-T-Lock and other pin-in-pin systems. Two concentric pin stacks per chamber, both of which must be set.
  3. ABUS Granit and other disc detainers. Not unbeatable, but they need a different tool and a different skill.
  4. American Lock, Squire Stronghold, ABUS 83 with full security pinning. The hardest pin tumbler padlocks you will meet in a shop.

Note what is not on this list: weight, body material, shackle thickness, price. A hardened steel padlock with four standard pins is a hard padlock to cut and an easy padlock to pick.

Easiest padlocks to pick — and why that matters to you

No-name brass padlocks, supermarket luggage and diary locks, and laminated Master Locks. Loose tolerances, weak springs, standard pins, wide keyways. This is good news: it means your first real padlock costs a few euros, and it means you can judge a padlock's category before you buy it.

The other easy group is anything a shim defeats: a padlock whose shackle is held by a spring latch rather than ball bearings opens in two seconds with no picking at all. Shim one cheap padlock and you will never buy a padlock without ball-bearing locking again.

Transparent Disc Detainer Practice Padlock
The mechanism that stops you · €27.9Transparent Disc Detainer Practice Padlock

If you want to understand why an ABUS Granit or an Abloy ignores your picks, this is the lock to own: a disc detainer in a clear body, so you can watch the discs rotate to their gates and the sidebar drop. It is the top-tier mechanism, made visible — and considerably cheaper than buying a Granit to stare at.

See the product

Picking is not how padlocks actually fail

Worth saying plainly, because this page could leave the wrong impression. In the real world padlocks are cut, levered or shimmed, not picked — a bolt cutter or an angle grinder beats every lock on this page in seconds, and that is what ratings like Sold Secure (UK), VdS (Germany), ART (Netherlands), FG (Norway) and SSF (Sweden) actually test. Those ratings say nothing about pick resistance, and a pick-resistant cylinder says nothing about cutting resistance.

If you are buying a padlock to secure something: get a ball-bearing shackle, a shrouded or closed body, a rating from the list above, and a cylinder from a brand you recognise. If you are buying a padlock to pick, the rest of this page is your shopping list. The two jobs are different — our guide on how secure your door lock is makes the same point about doors.

Which padlock should you practise on next?

Follow the belt order rather than the brand:

  • White belt: a transparent padlock, then any laminated Master Lock or no-name brass padlock.
  • Yellow: ABUS 55/65 brass, or a cutaway padlock picked with the window turned away.
  • Orange: anything with one spool pin — a security-pin practice lock, or an ABUS 83 you re-pinned yourself.
  • Green: mixed spool and serrated pinning, narrower keyways.
  • Blue: a disc detainer — new mechanism, new tool.

Everything on that list is graded by belt in our belt locks category, and the padlocks for lock picking page sorts the real ones from easy to hard. Only pick padlocks you own — see legality by country.

Frequently asked questions

What is the hardest padlock to pick?

For a hobbyist, an Abloy Protec2 or a comparable disc-detainer-plus-sidebar system — realistically outside hobby reach. Among padlocks you can buy in a shop, American Lock's industrial series, Squire Stronghold and a fully security-pinned ABUS 83 are the hardest pin tumbler padlocks, and ABUS Granit changes the mechanism entirely.

Are Master Lock padlocks easy to pick?

The laminated ones (No. 3, 140, 150) are, and that is why almost every picker starts on them: four standard pins, loose tolerances, a wide keyway. Master Lock's ProSeries line is a different product with spool pins and tighter tolerances, and it is not a beginner lock.

Is ABUS better than Master Lock?

For pick resistance, the model matters far more than the brand. An ABUS 83 with mixed security pins is much harder than a laminated Master Lock; an entry-level ABUS brass padlock and a laminated Master Lock are in the same band. ABUS's advantage is that its range goes much further up, to the Granit disc-detainer models.

Does a more expensive padlock resist picking better?

Not reliably. Price mostly buys body strength, weather sealing and cutting resistance. A €7 brass padlock with one spool pin can be harder to pick than a €40 hardened padlock with four standard pins — the cylinder is what matters.

What makes a padlock pick-resistant?

Security pins (spool, serrated, mushroom), tight manufacturing tolerances, a narrow paracentric keyway, and — the biggest jump — a non-pin mechanism such as a disc detainer. Pin count is almost irrelevant by comparison.

Which padlock should I buy to practise lock picking?

Start with a transparent padlock, then a cheap brass or laminated padlock, then something with one spool pin. Our padlocks for lock picking are graded easy to hard so you can buy the next step rather than guess in a hardware shop.

Next step: learn what a spool pin does to your tension in security pins explained, or pick your next lock by level with the belt ranking.

Written by the Lockpit Kit teamWe pick every practice lock we list, grade it against the community belt ranking and write the guide that ships in the box. Everything here comes from that bench work and from the public sources linked in the article. Only pick locks you own — see legality by country.

Olvass tovább