Útmutató

How to Pick a Dimple Lock: Flag Picks, Tension and Why Your Hook Won't Fit

Your hook does not fit, and that is the point. Dimple locks turn the pin stack sideways — here is the mechanism, the tools that actually reach the pins, and an honest difficulty rating.

Updated 20 October 2026 · Technique · 9 min read

Sooner or later you meet a key with no teeth — a flat blade with round craters pressed into its face. That is a dimple lock, and the hook that opens every padlock you own will not even enter the keyway properly. Nothing is wrong with your technique. The lock has rotated the whole problem ninety degrees.

What is a dimple lock?

A dimple lock is a pin tumbler lock with its pin stacks turned sideways. Instead of sitting above the keyway and being lifted by the teeth along the top edge of a key, the pins press in from the flat faces of the keyway and are pushed by the dimples — the round craters milled into the blade.

Everything you already know still applies. There is a shear line, there are key pins and driver pins and springs, there is a binding order, and tension still does most of the work. What changes is geometry:

  • The pins come from the sides, often from both sides at once. Many dimple cylinders have two rows facing each other, and some add a third row in the roof.
  • The keyway is a flat slot, wide but shallow. A standard hook has nowhere to brace and no way to push sideways.
  • The key is reversible. It works either way up, which is why dimple keys feel pleasant to use and why the locks sell well.

In short: a dimple lock is not a harder pin tumbler, it is a sideways one. You need flag picks to reach pins that sit left and right, and a flat tension tool thin enough to leave room in a slot keyway. With the right two tools the difficulty is close to a decent euro cylinder; with the wrong ones it is impossible.

Which locks are dimple locks?

You have almost certainly held one. Dimple cylinders are standard on European front doors in the mid and upper ranges, and the pattern shows up across the brands people recognise:

Brand Where you meet it What to expect
Kaba / dormakaba Swiss and German doors, offices Two or three pin rows, tight tolerances
Mul-T-Lock High security, telescopic pin-in-pin Two pins per chamber, both must set
CISA, Iseo, Mottura Italian front doors Dimple plus anti-drill pins
ABUS, EVVA German and Austrian cylinders Dimple with spools and sidebars
Cheap no-name dimple Furniture, cabinets, some padlocks Loose, forgiving, a good first target

That last row matters more than it looks. A no-name dimple cylinder is the dimple equivalent of a laminated padlock: loose tolerances, ordinary driver pins, nothing clever. It is the lock you should learn on, and it costs almost nothing.

Why your hook does not work on a dimple lock

Three reasons, and none of them are about skill:

1. The tip points the wrong way

A hook lifts. Its working face is on top, shaped to push a pin straight up. In a dimple lock the pins travel horizontally, so a lifting face has nothing to lift. You need a pick whose working face points sideways — that is exactly what a flag pick is: a thin shaft with a small rectangular paddle, the flag, standing proud of one side.

2. The keyway is a slot, not a channel

A paracentric keyway gives a hook walls to slide along. A dimple keyway is a flat gap, and a hook rattles in it with no reference edge. The flag pick's shaft is designed to ride along the flat face and keep the flag at a known depth.

3. Your tension wrench is stealing the room

This is the one that defeats most people. A dimple keyway is wide, so the obvious move is to use a wide tension tool — and then the pick has nowhere left to go. Dimple tension wants a thin, flat wrench tucked to one edge, taking as little of the slot as possible. Our double-head tension set exists for exactly this kind of problem: the thinnest blade that still transmits torque wins.

How to pick a dimple lock, step by step

  1. Insert the tension tool at one edge of the slot, as flat and as far out of the way as you can manage, and apply the lightest torque you can hold.
  2. Insert the flag pick along the opposite face. Feel the pins as bumps along the flat — you are reading a row, not a ridge.
  3. Find the binding pin exactly as you would on a standard lock: sweep gently, and one pin will feel firm while the rest feel springy.
  4. Push it sideways, not up. Rotate the flag so its paddle faces the pin, then press. The motion is a small nudge, not a lift.
  5. Listen for the counter-rotation. Dimple cylinders in the mid range are full of spool pins, so expect false sets and the usual cure: ease off the tension and let the core rock back.
  6. Do the other side. With two opposing rows you work one row, then flip the pick over and work the other. The binding order runs across both rows, not down one.

The round-handled picks are worth a word here. A flag has to be rotated to present its paddle to a pin, and doing that with a flat handle means letting go and regripping. A round handle rolls between your fingertips without losing the tool — a small thing that stops mattering never.

Dimple Lock Pick Set – 18 Pieces (Kaba-style Flag Picks)
The kit that actually reaches the pins · €44.9Dimple Lock Pick Set – 18 Pieces (Kaba-style Flag Picks)

Eighteen pieces built around the only two shapes that matter here: flag picks in several widths and depths, and the flat tension wrenches that fit a slot keyway without eating the space your pick needs. If you own one dimple set, this is the sensible one — the specialised rakes are a bonus, not the reason to buy.

See the product

How hard is a dimple lock, really?

Harder than the internet suggests and easier than the marketing claims. On the community belt ranking, a plain dimple cylinder with ordinary driver pins sits around blue belt — not because the pins are clever, but because the tool handling is new and everything you have trained is pointed the wrong way.

What actually raises the difficulty, in order:

  • A second pin row. Twice the pins, and a binding order that jumps between rows.
  • Spools and serrated drivers. Standard above the entry level, and false sets feel different sideways.
  • Pin-in-pin. Mul-T-Lock style telescopic pins mean two concentric stacks per chamber, both of which must reach the shear line. This is where hobby picking generally stops.
  • Sidebars. A second locking element the pins do not control. Pick every pin perfectly and the core still will not turn.

So: a cheap dimple cylinder is a fun weekend. A mid-range Kaba with two rows and spools is a month. A Mul-T-Lock with a sidebar is a different sport, and there is no shame in saying so.

What to buy, in what order

  1. A flag pick set and a thin tension wrench. Without both, nothing below matters.
  2. The cheapest dimple cylinder you can find. Furniture-grade, loose, ordinary pins. This is your white belt dimple.
  3. A dimple practice lock — our transparent practice lock ships in a dimple configuration, which is the only way to actually see horizontal pins move. Thirty seconds of that beats an hour of reading this page.
  4. A real door cylinder, second hand, with the key. Then repin it harder when it gets easy.

Everything on that list is in dimple lock picks. And the standing rule applies here as everywhere: only pick locks you own, and never a lock in service — a dimple cylinder is very often somebody's front door. See legality by country before you carry anything in public.

Frequently asked questions

What is a dimple lock?

A pin tumbler lock with the pin stacks turned sideways. The pins press in from the flat faces of the keyway instead of from above, and the key is a flat blade with round craters — dimples — milled into it rather than teeth along the edge. Most are reversible, so the key works either way up.

Can you pick a dimple lock with a normal lock pick?

Realistically no. A hook's working face points upwards to lift pins, and dimple pins travel horizontally, so there is nothing for it to lift. You need flag picks, whose small rectangular paddle presses sideways, plus a thin flat tension wrench that leaves room in the slot keyway.

What tools do you need to pick a dimple lock?

Two things: a set of flag picks in a few widths and depths, and a thin flat tension tool. The tension tool is the part people get wrong — a wide wrench fills the keyway and leaves the pick nowhere to work. Rakes and specialised profiles are useful later, not first.

Are dimple locks harder to pick than normal locks?

A plain dimple cylinder with ordinary driver pins is roughly blue belt — harder mostly because the tool handling is unfamiliar. Difficulty rises sharply with a second pin row, with spool and serrated drivers, and with pin-in-pin systems like Mul-T-Lock, where two concentric pins per chamber must both set.

Are dimple locks more secure?

Against picking, moderately — the extra pin rows and the common use of security pins help. Against the attacks that actually happen to European doors, the cylinder format matters far more than the keying: see how secure is your door lock, where snapping and pulling beat picking every time.

Which brands use dimple locks?

Kaba and dormakaba, Mul-T-Lock, CISA, Iseo, Mottura, ABUS and EVVA among others, mostly in mid and upper range door cylinders. Cheap unbranded dimple cylinders also turn up in furniture and cabinets, and those are the ones worth learning on.

Next: the mechanism underneath all of this is the same one in how a pin tumbler lock works, and the false sets you will hit are explained in security pins explained.

Written by the Lockpit Kit teamWe pick every practice lock we list, grade it against the community belt ranking and write the guide that ships in the box. Everything here comes from that bench work and from the public sources linked in the article. Only pick locks you own — see legality by country.

Olvass tovább