You have a filing cabinet, a desk drawer, a toolbox or a mailbox, and no key. Almost all of them use the same mechanism — a wafer lock or a cam lock built around one — and it is the easiest lock family in existence. This guide explains how they work, how to open yours, and why a set of jiggler keys beats picking on most of them.
What is a wafer lock?
A wafer lock uses flat, spring-loaded plates — wafers — instead of the stacked pin pairs of a pin tumbler lock. Each wafer sits in a slot through the plug and sticks out of the top (and often the bottom) into grooves in the housing, blocking rotation. The correct key pushes every wafer to the exact height where none of them protrudes any more, and the plug turns.
The crucial difference: in a pin tumbler lock, each position has two pieces that must meet at a shear line. In a wafer lock, each position has one flat piece that simply has to be aligned. Fewer parts, far looser tolerances, weaker springs — which is exactly why wafer locks open so easily.
Two variants matter in practice. A single-sided wafer lock has wafers protruding upward only. A double-sided wafer lock has them alternating up and down, which is why the key works either way round; these need a double-sided pick or a jiggler, not a standard hook.
The short version: if the key is small, flat, stamped with a two- or three-digit code and works both ways up, you have a double-sided wafer lock. A jiggler key set will usually open it in under a minute, and a replacement lock costs less than a locksmith's call-out.
What is a cam lock, and how does a cam lock work?
A cam lock is not a separate mechanism — it is a format. It is a short cylinder with a flat metal tongue (the cam) on the back; turning the key rotates the cam through 90° or 180° so it catches behind a frame, a lid or a strike. Inside, that cylinder is almost always a wafer lock, occasionally a pin tumbler and occasionally tubular.
Cam locks are everywhere: filing cabinets, desk drawers, lockers, toolboxes, vending machines, electrical cabinets, caravan hatches, furniture doors. Three things decide which replacement fits yours:
- Cylinder diameter — commonly 16, 19 or 22 mm.
- Barrel length — how thick the panel is that the lock passes through.
- Cam shape and rotation — straight or offset cam, 90° or 180° turn.
Measure those three and any hardware supplier can match it. That is also the honest answer to "how to measure a cam lock": diameter across the cylinder face, length from the back of the face to the cam, then the cam's own offset.
How to open a locked filing cabinet or desk drawer: five methods, worst to best
1. Find the key code (free, and the method nobody tries)
Most office furniture locks are stamped with a two- to four-character code on the face of the lock or on the key — things like 0T, R501, 8K. Those codes are near-universal across office brands, and a key cut to that code costs a few euros from any locksmith or office-furniture supplier. If the cabinet is a Bisley, Steelcase, Ikea Galant or any mainstream brand, start here. It is cheaper and faster than everything below.
2. Jiggler keys (the practical winner)
A jiggler key — also called a try-out key or rocker key — is a pre-shaped blank with a wavy profile that touches several wafer heights at once. You insert it, apply the lightest turning pressure, and rock and wiggle it in and out. The wafers bounce to their heights almost by themselves and the lock opens. On a cheap double-sided wafer lock this often takes under thirty seconds, and a 22-key set covers most office, mailbox and cam lock profiles.
This is not really picking — it is a bypass that exploits how loose wafer tolerances are. It is also why no one should store anything valuable in a locked desk drawer.
3. Raking with a wafer rake
A wide rake, scrubbed back and forth under light tension, defeats most single-sided wafer locks. A standard snake rake from any lock pick set works; dedicated double-sided wafer picks have teeth top and bottom for the alternating type.
4. Single pin picking the wafers
It works exactly as it does on a pin tumbler: light tension, find the binding wafer, lift it, move on. In practice, wafer locks are so loose that the binding order is mushy and raking is faster. Learn it on a wafer practice lock if you want the skill — not because you need it to open the drawer.
5. Drilling or replacing (last resort)
Drilling a cam lock destroys it and leaves metal shavings in the cabinet. A replacement cam lock costs very little, so if the lock is cheap and you own the furniture, the sane order is: key code, jiggler, rake, then simply unscrew the old lock and fit a new one. On most filing cabinets the lock is held by a single nut or a spring clip behind the face.
Tools this guide keeps pointing at
How to pick a mailbox lock
A domestic mailbox lock is almost always a small double-sided wafer cam lock, sometimes with as few as three or four wafers and very weak springs. Jiggler keys open them routinely; a wafer rake does too. The honest conclusion is the same one postal services reached long ago: a mailbox lock is a courtesy, not security. If you are waiting on documents that matter, a parcel locker or a lockable post box with a pin tumbler cylinder is a different class of product.
If you have lost your mailbox key, the cheapest route is a replacement cam lock in the same diameter and barrel length — usually two screws and five minutes — or your landlord's spare, which for shared blocks is often keyed alike.
How to pick a locker: gym, school and office lockers
"Locker" covers three completely different problems, and the first job is working out which one you have.
- A built-in keyed lock — the flat key, the small keyway, the code stamped on the face. That is a wafer cam lock, and everything above applies: key code first, then jiggler keys, then a wafer rake.
- A padlock through a hasp — now it is a pin tumbler padlock, a different family. Pick it, or test whether the shackle is held by a spring latch rather than ball bearings, in which case a shim opens it in seconds.
- A built-in combination dial — no keyway, so no picking. That is decoding, a separate skill, and not what this guide covers.
Gym and school lockers are usually the weakest of the three, because they are bought by the hundred and the whole bank often shares a handful of key codes. That is the real lesson: a locker is designed to stop a casual hand, not a determined one. Nothing you would miss should live in one.
Before you touch one: a locker at a gym, a school or an office belongs to that institution, not to you, even when your things are inside it. Ask the front desk or facilities for the key or the code — they open lockers every week and it takes two minutes. Picking it yourself is the version of this story that ends badly, however good your intentions.
Tubular locks: the other mechanism in this family
A tubular lock arranges its pins in a circle around a central post, opened by a hollow cylindrical key. You meet them on vending machines, coin-op machines, pinball cabinets, bike locks, some tool chests and certain high-turnover cam locks.
They are picked with a dedicated tubular lock pick: seven (sometimes eight) feelers arranged in the same circle, pushed in while you apply rotational tension. The feelers set to the pin heights and the tool keeps that setting, so you can re-open the same lock instantly afterwards and even read off the combination — which is really decoding, not picking.
The one thing to get right is diameter. Tubular locks come in 7.0, 7.5 and 7.8 mm, and the pick has to match. Measure the outside diameter of the hollow key. Everything else about tubular picking is mechanical rather than tactile, which is why experienced pickers often find it less interesting than a good pin tumbler — and why tubular locks have a poor security reputation.
No, you cannot pick one with a pen. The ballpoint-pen trick worked on one specific model of Kryptonite bike lock in 2004, the design was changed within months, and it has not worked on anything since.
| Lock you have | Mechanism | Fastest honest way in | Belt |
|---|---|---|---|
| Filing cabinet, desk drawer | Double-sided wafer cam lock | Key code, then jiggler keys | White |
| Office locker, toolbox | Wafer cam lock | Jiggler keys or wafer rake | White |
| Mailbox | Small double-sided wafer | Jiggler keys | White |
| Furniture door, cabinet | Wafer or pin tumbler cam lock | Rake, or pick if pin tumbler | White–yellow |
| Vending machine, pinball, coin-op | Tubular, 7 pins | Tubular pick of the right diameter | Blue mechanism, easy in practice |
| Padlock on a locker | Pin tumbler padlock | Pick it, or shim the shackle | White–yellow |

Twenty-two pre-shaped blanks on a ring, covering the common wafer profiles in office furniture, mailboxes and cam locks. This is the tool that actually opens the drawer — picks are the hobby, jigglers are the result — and it is the cheapest item in our catalogue that solves a real problem on day one.
See the productWhy wafer locks are so weak (and what that should tell you)
Three reasons, and all three are deliberate cost decisions rather than mistakes:
- One moving part per position. No shear line to find, no two-piece stack to balance. Alignment is forgiving by millimetres, not hundredths.
- Few positions. Four or five wafers is typical, and many use only two or three distinct heights — meaning a handful of key codes covers an entire product range. Master keying by accident.
- Weak springs and wide keyways. Both make jiggling work, because the wafers bounce freely.
The useful takeaway is not that your furniture is worthless, it is what a wafer lock is for: keeping honest people out, separating public from private, stopping a drawer opening in transit. For anything you would genuinely mind losing — documents, cash, medication, keys to other things — a wafer lock is the wrong product. That is the same conclusion our guide on door lock security reaches about cheap cylinders.
Where wafer locks fit in the learning path
They are the lowest rung of the belt ranking, and the community does not count them as a real test — correctly, because the skills do not transfer upward. Picking wafers teaches you very little about binding order and nothing about security pins.
But they are brilliant for one thing: your first ever open, and the first time the hobby feels useful in real life. Most people's first genuine "I opened something I needed to open" moment is a desk drawer or a mailbox, not a padlock. If you want the skill that scales, start on a transparent pin tumbler padlock and treat wafer locks as a side quest.
One rule applies to all of it: only open locks you own, or have the owner's permission to open. A filing cabinet at work is your employer's, not yours, no matter who sits at the desk — ask facilities for the key. Possessing picks and jigglers is legal in most of Europe and restricted in a few places; the country-by-country detail is on our legality page.
Frequently asked questions
How do you open a locked filing cabinet without a key?
First look for a two- to four-character key code stamped on the lock face or an old key — a replacement key cut to that code costs a few euros. Failing that, a jiggler key set opens most office wafer locks in under a minute, and a wafer rake under light tension works too. If the lock is cheap and the cabinet is yours, replacing the cam lock is often the quickest fix of all.
How do wafer locks work?
Flat spring-loaded plates called wafers sit in slots through the plug and protrude into grooves in the housing, blocking rotation. The correct key pushes every wafer to the height where none protrudes, and the plug turns. Unlike a pin tumbler lock there is only one moving piece per position, which is why wafer locks are so easy to open.
What is a cam lock?
A format rather than a mechanism: a short cylinder with a flat metal tongue (the cam) on the back that rotates 90° or 180° to catch behind a frame or lid. Inside it is usually a wafer lock. To replace one you need the cylinder diameter, the barrel length and the cam shape and rotation.
What are jiggler keys and do they work?
Pre-shaped blanks with a wavy profile that touches several wafer heights at once. You rock and wiggle them under very light turning pressure and the wafers bounce into place. On cheap double-sided wafer locks — filing cabinets, mailboxes, cam locks — they work very reliably, which is also a fair warning about what those locks protect.
How do you pick a tubular lock?
With a tubular pick of the matching diameter — 7.0, 7.5 or 7.8 mm. Its ring of feelers pushes the pins while you apply rotational tension, and the tool keeps the setting so you can re-open the lock instantly. Measure the outside diameter of the hollow key before buying. You cannot open one with a pen; that trick applied to one bike lock model in 2004.
Is it legal to pick my own filing cabinet or mailbox?
Opening a lock you own is legal across nearly all of Europe. A cabinet at work belongs to your employer, so ask them first — permission is what makes it legal, not ownership of the tools. See legality by country; Poland restricts possession of picks under art. 129 of the Code of Petty Offences.
Next step: if you want the skill rather than the shortcut, start with how to pick a lock for beginners and a transparent practice lock. Mechanism detail is in how a pin tumbler lock works.
22-in-1 Jiggler Key Set for Wafer Locks and Padlocks
Lock Pick Set in Leather Zip Case – 10 or 24 Picks
Transparent Practice Lock – Choose the Mechanism (8 Types)