Guide

How to Rake a Lock: Snake, Bogota, City and Wave Rakes Explained

Raking is how almost everyone opens their first lock. Here is the technique, what each rake profile is actually for, and the exact point where raking stops working.

Updated 12 October 2026 · Technique · 9 min read

Raking is how most people open their first lock, usually within fifteen minutes of unpacking a kit. It is also the technique beginners misuse the longest. This guide covers how to rake a lock properly, what each rake profile is for, and the precise moment raking stops working — which is the moment you become a lock picker rather than someone who owns picks.

What raking a lock actually does

A pin tumbler lock opens when every driver pin sits above the shear line at the same time. Single pin picking gets there deliberately, one pin at a time. Raking gets there by chance, repeatedly, very fast.

You hold a light turning force on the plug and scrub a toothed profile in and out across all the pins. Each pass bounces pins to random heights; whenever one happens to cross the shear line while the plug is under tension, the plug ledge catches it and that pin stays set. Pins accumulate. A few seconds of scrubbing can set five pins that you could not have found individually yet.

That is why raking is not cheating and not a dead end — it is a legitimate attack that exploits the same manufacturing tolerances single pin picking exploits. It is simply blind.

The one thing that makes raking work: varying tension while you scrub. Constant tension locks the pins in place and nothing accumulates. Pulse your finger pressure — on, almost off, on — as the rake moves. More beginners fail at raking because of static tension than because of the wrong rake.

How to rake a lock, step by step

  1. Insert the tension wrench in the bottom of the keyway and apply very light rotational force — the weight of a fingertip, in the direction the key turns.
  2. Insert the rake all the way to the back of the keyway, teeth upward, without touching the pins yet.
  3. Scrub. Pull the rake out while pressing gently upward against the pins, then push it back in. Three or four strokes per second, not frantic.
  4. Vary the tension as you scrub. This is the step everyone skips, and it is the one that matters.
  5. Vary the depth too. Lift slightly harder on some passes, barely touch on others. You are sampling heights, so sampling more of them helps.
  6. Reset after twenty seconds. Release everything, let the pins drop, start again. If a pin is overset, no amount of scrubbing will fix it — only a reset will.

On a transparent practice padlock with standard pins, this opens the lock within a few strokes. Doing it with the acrylic body facing you is worth five minutes of your life: you can see pins setting and dropping as your tension changes, and after that the "vary the tension" instruction stops being abstract.

Rake profiles: what each one is for

Snake rake (the one to start with)

A smooth S-curve, usually two or three waves. The most forgiving profile and the most generally useful — it works on shallow and deep pinnings alike, and it is gentle enough not to overset constantly. If you only ever use one rake, use this.

Bogota rake (triple peak)

Two or three tall, rounded peaks. Designed to be rocked rather than scrubbed: you pivot the handle up and down while the tips ride the pins. Devastating on padlocks and short pinnings, compact enough that many pickers keep a Bogota pair on a keyring. Different motion, so give it its own session rather than scrubbing it like a snake.

City rake (square teeth)

A row of square-topped teeth at mixed heights, like a city skyline. Built for pinnings with large height differences between adjacent pins. Aggressive — it oversets easily on shallow locks, and it shines on the ones a snake rake keeps failing.

Wave rake (W rake)

Uniform rounded waves. Sits between snake and city: more aggressive than a snake, more even than a city. Good second rake to try when the first fails.

Half diamond (the hybrid)

A single triangular peak. It rakes, and because it has one tip you can also use it to push an individual pin — the only tool on this list that bridges into single pin picking. Every kit should contain one.

L rake and double ball

L rakes have a long flat profile for shallow, evenly pinned locks. Double balls are for wafer locks and double-sided wafer cam locks rather than pin tumblers — different family, see wafer and cam locks.

Which rake should a beginner buy?

Rake Motion Best on Risk
Snake Scrub in and out Almost everything; the default Low — the forgiving choice
Bogota Rock the handle Padlocks, short pinnings Low, but needs its own technique
City Scrub, shallow strokes Big height differences between pins High — oversets on easy locks
Wave / W Scrub Mid-range pinnings Medium
Half diamond Scrub or single pin Everything; doubles as a pick Low
L rake Shallow scrub Shallow, evenly pinned locks Medium
Double ball Scrub Wafer locks, not pin tumblers n/a — different family

Two rakes and a half diamond cover essentially every lock a hobbyist meets: snake, Bogota, half diamond. A 30-piece set gives you the rest to experiment with, but the fourth rake does not open locks the first three cannot.

Raking vs single pin picking: when raking stops working

Raking has a hard ceiling, and it is sharp rather than gradual. It stops working as soon as the lock contains spool or serrated security pins.

The reason is mechanical. A rake works because pins bounce past the shear line and get caught. A spool pin does the opposite: as it approaches the shear line it pulls the plug further round into a false set, then jams. Scrubbing harder drives it deeper into the jam. No rake motion can produce the gentle tension release a spool needs.

So the honest division of labour is:

  • Rake cheap padlocks, standard-pinned cylinders, wafer locks, and anything you want open quickly rather than skilfully.
  • Single pin pick everything with security pins, tight tolerances, or a reputation. Which is also everything that counts in the belt ranking — raking does not advance a belt, and that rule exists for exactly this reason.

Use raking the way it deserves: as the fast opener, as the diagnostic (if a lock rakes open in two seconds, it has no security pins), and as the thing that keeps a bad evening from being a wasted one.

Lock Pick Set – 30 Picks, 2 Transparent Padlocks, Zip Case
Best for comparing rakes · €64.9Lock Pick Set – 30 Picks, 2 Transparent Padlocks, Zip Case

Thirty picks means you actually get the full rake family — snake, Bogota, city, wave, L, double ball — plus hooks and half diamonds, instead of three profiles and a lot of duplicates. It ships with two transparent practice padlocks, which is the only way to see what your tension is doing to the pins while you scrub.

See the product

Common raking mistakes

  • Static tension. The number one cause of "my rake does nothing". Pulse it.
  • Too much tension. Pins jam against the plug instead of bouncing. Halve it, then halve it again.
  • Scrubbing too hard. Oversetting pins puts the lock further from open than when you started, and you cannot feel that it happened. Reset often.
  • Scrubbing for a minute straight. After twenty seconds the lock is usually in a worse state, not a better one. Release, let the pins drop, go again.
  • Using a city rake on an easy lock. It oversets everything. Start with a snake and escalate.
  • Treating raking as the goal. It is the first evening, not the hobby. The skill that opens hard locks is single pin picking.

Do electric rakes and pick guns count as raking?

Mechanically, no — they are bumping, not raking. An electric pick or pick gun vibrates or snaps a needle against the pins so the drivers jump above the shear line, which is the physics of a bump key rather than of a scrubbing rake. Practically, they fail in the same place raking does: at the first spool pin. They are fast, they teach nothing, and the belt ranking ignores them.

If you want the same speed without the dead end, a snake rake and a decent tension wrench cost less and work on more locks.

Practise raking on locks you own

Raking is quick, which makes it tempting to try on something that is not yours. Don't — the hobby's two rules are only pick locks you own and never a lock in use, and raking a lock in service wears the pins faster than careful single pin picking does. Legality is per country: possessing picks is legal across most of Europe, the UK restricts carrying them, Finland requires an acceptable reason, and Poland restricts possession itself under art. 129 of the Code of Petty Offences. Details on our legality page.

Frequently asked questions

How do you rake a lock open?

Apply very light tension with a tension wrench in the bottom of the keyway, insert a snake rake to the back, then scrub it in and out against the pins while varying your tension. Reset every twenty seconds if nothing happens. On a standard-pinned padlock it usually opens within a few strokes.

What is the best rake for lock picking?

A snake rake for general use, a Bogota pair for padlocks, and a half diamond because it rakes and also pushes individual pins. Those three cover almost every lock a hobbyist meets; city and wave rakes are useful escalations when a snake keeps failing.

Is raking easier than single pin picking?

Much easier to start, and that is the point — it gets you your first open on day one. It is also capped: raking fails against spool and serrated security pins, where single pin picking still works. Learn raking first, then learn single pin picking, in that order.

Why is my rake not opening the lock?

Almost always tension. Either it is constant (pulse it instead) or too heavy (halve it). The next most likely cause is an overset pin, which no amount of scrubbing clears — release everything and start again. If the lock has spool pins, raking will not open it at all.

What is the difference between a snake rake and a Bogota?

A snake rake has a smooth S-curve and is scrubbed in and out. A Bogota has two or three tall peaks and is rocked by pivoting the handle. Snakes are more forgiving across pinnings; Bogotas are brutally effective on padlocks and fit on a keyring.

Does raking damage a lock?

Not usually, but it wears pins faster than single pin picking because you are scraping every pin on every stroke. On a practice lock that is irrelevant. On a lock you rely on it is one more reason not to pick it — buy a practice lock instead.

Next step: learn the technique raking cannot replace — how to pick a lock for beginners — then meet the pins that stop every rake in security pins explained.

Written by the Lockpit Kit teamWe pick every practice lock we list, grade it against the community belt ranking and write the guide that ships in the box. Everything here comes from that bench work and from the public sources linked in the article. Only pick locks you own — see legality by country.

Keep reading